Hej.
Mam nadzieję, że ktoś skorzysta
Na stronie
http://engelaxil.hr/download/opticum-sloth-combo/ znalazłem wersję na PC edytora kanałów, ustawień dekodera, sieci oraz innych "bajerów" o nazwie "
PC Editor Tool 1.9.8" (jest to dostosowany "U2C Editor", nowsza wersja niż kolega poprzednio podawał v1.9.7).
Oryginalny link do edytora:
http://engelaxil.hr/download_file/434
UWAGA / PYTANIE:
Dodałbym do załącznika do tego postu edytor i zrzuty ekranu, ale nie mam takiej opcji przy tworzeniu posta, więc mogę przesłać komuś kto takie uprawnienia ma, aby dołączył to na forum, żeby później nie zaginęło w czeluściach internetu
PC_Editor_Tool_V198.rar (~1MB)
PC_Editor_Tool_V198_screenshots.zip (~1,1MB)
Tłumaczenie strony Google Translatorem na angielski:
https://translate.google.pl/translate?h ... h-combo%2F
Info dotyczące edytora (tłumaczenie Google Translatorem na angielski):
- Channel list editor work with newer SW
- Do not use the old list of programs with the new SW and vice versa
Odczyt danych z dekodera wydaje się poprawny, znajdują się tam ustawienia oraz dane wprowadzone ręcznie w dekoderze.
Testowane na:
Opticum Sloth Combo Plus, FW v2.1.70 (2016-09-27) - taki soft miałem oryginalnie wgrany po zakupie dekodera.
Ustawienia/operacje (w wielkim skrócie):
00. Dekoder musi być włączony.
01. Dekoder był połączony z routerem kablem sieciowym LAN:
Menu > Ustawienia systemowe > Ustawienia IP > Rodzaj linku: Przewód sieciowy LAN
02. Dekoder miał przydzielone poprawne parametry sieciowe po DHCP:
Menu > Ustawienia systemowe > Ustawienia IP > Ustawienia połączenia > Tryb konfiguracji: DHCP
03. W dekoderze były włączone następujące opcje z ustawieniami domyślnymi (opis w instrukcji obsługi w PDF, strona 31):
Menu > Ustawienia systemowe > Ustawienia IP > Serwer sieci WEB > Serwer sieci WEB: HTTP
Menu > Ustawienia systemowe > Ustawienia IP > Sterowanie sieciowe (Android) > Sterowanie sieciowe WEB: Włączone,
ustawione Hasło: root
04. W programie PC Editor Tool wpisany został adres IP dekodera:
Menu > Server > Server Config - STB IP: 192.168.1.XXX
05. Połączenie programu PC Editor Tool z dekoderem:
Menu > Server > Connect
06. Pobranie do programu PC Editor Tool danych z dekodera:
Menu > Transport > Download > zaznaczone opcje wg. uznania lub opcja All > przycisk Confirm
07. Działania/modyfikacje na danych w programie PC Editor Tool, można wybrać sekcje/ustawienia:
Menu > View > ...
08. Zapis/przesłanie danych z programu PC Editor Tool do dekodera:
Menu > Transport > Upload
09. Rozłączenie programu PC Editor Tool z dekoderem:
Menu > Server > Disconnect
10. Wyjście z programu:
Menu > File > Exit
!!! UWAGA !!!
Nie testowałem jeszcze zapisu wprowadzonych modyfikacji, tylko odczyt i edycję.
Nie odpowiadam za uszkodzenia oraz inne przypadłości związane z zabawą z dekoderem.
Poniżej opisy z powyższej strony (tłumaczenie Google Translatorem na angielski).
------------------
*** Instructions for upgrading ***
Upgrade SW support is intended to professionals and advanced users.
Incorrect upgrade can cause destruction of the receiver, and the forfeiture.
The receiver serves to receive unencrypted digital satellite channels (free-to-air) and encrypted programs through appropriate access card and decoder issued by the manufacturer of the program, in private conditions. Through the Internet connection is possible to access free content.
It is intended solely for that purpose and not just for this use.
Manufacturer and seller will not be liable for damage resulting from inappropriate use.
- Download the compressed (RAR or ZIP) file, and unpack.
- Save the file to a USB stick.
Upgrade file has an extension .bin and size 16.384KB (Check!)
- After loading and initializing the USB Stick, using the "USB" switch to the USB menu.
- Select USB Upgrade.
- Upgrade Type: 'ALL': SW; 'SW+Channel Data' to SW + list; 'Channel Data' to the list.
- Click the 'Start' - opens the file browser - select a file from a USB drive.
- Respond with "Yes" and wait until the receiver again I'm not involved in the programs.
- Be patient, the procedure will take some time.
---
If something is wrongly made, RECEIVER NOT INCLUDED,
Or receiver will not accept SW FOR YOU SURE IS GOOD,
Before sending RECEIVER FOR SERVICE, try the following:
1. Locate the correct SW or download it again from our site.
2. Rename it to "force_upgrade_rom.bin"
3. Copy it to the root USB
4. Restart receiver - unplug it and turn on
5. Squeeze on the remote OK button (4 times) until you start upgrading
The receiver should I withdraw the above SW.
Wait until the receiver is turned on again.
------------------
*** Access to RedTube YouPorn PipoTube and related sites ***
For access to RedTube, YouPorn, PipoTube and related sites, considering that it is a content designed exclusively adult audience, you need to enter a password that is different from other user and factory passwords.
Factory password: 6579
------------------
*** Programming the remote control for the TV ***
Remote control SLOTH series receivers can be programmed to perform basic functions TV remote control.
This way you can avoid using two remote controls when working with this receiver.
Programmable keys are located on the top SLOTH remote control and are marked "TV CONTROL":
POWER (Red), SET, TV/AV, VOL-, VOL+
The procedure is as follows:
> Turn the remote controls toward each other at a distance of 1-2 cm
> Hold down the key SET to SLOTH D.Yu. while white POWER button lights up red -
Remote is ready for programming.
> While holding the RED button on the POWER SLOTH D.Yu. Press and hold the POWER button on the remote
control of the TV while the white POWER button on SLOTH D.Yu. flashes three times.
When this button again steadily bright red, and key programming is completed.
> Repeat procedure and for other key combinations:
TV/AV > TV/AV or SOURCE
VOL- > VOL-
VOL+ > VOL+
> Once again press the SET at SLOT D.Yu. for the completion of procedures - extinguished the white POWER button.
REMARK:
Programmable are just above the buttons on the remote control SLOTH.
You can select other buttons on the TV remote control instead of the above-proposed, which will be activate the SLOTH d.u, but the keys have proposed the most sense, ie. to turn on the TV (if not included) switch to the SCART AV or HDMI input, and if necessary synchronize the volume on the TV and the DVB receiver.
------------------